How To Remove Dresser Drawers With Bottom Slides

Knowing how to remove dresser drawers will exist handy, equally it volition be easier to make clean it, or motility it wherever you want. Moving around bigger pieces of furniture such equally a dresser tin can be a tricky job.

This is especially relevant if you lot are moving to another house. Also, when doing general house cleaning, or just making touch-ups and rearrangements around the house.

When you know how to go drawers out of a dresser, you'll automatically speed upward any chore related to it, since the dresser itself volition be much lighter.

The secret is to know how to remove drawers without doing whatsoever damage to the article of furniture. The methods and tools yous'll have to utilize depend on the type of slides used for the drawers.

In this guide, we are pointing out some of the most frequent drawer mechanisms and advisable techniques you can utilise to remove the drawers as just and smoothly equally possible.

So hither's a quick rundown of how to complete this task for the most popular types of drawers.

You should check the type of drawer-slides you accept earlier tackling the removing part. Too, when the drawers for some reason become stuck – you would have to remove them to identify the event.

If you are looking for means and tips on how to remove dresser drawers easily and quickly, then this guide is upward to your alley!

This post contains affiliate links. See our disclosure policy hither.

1. How to remove dresser drawers with bottom slide

The simplest way to know that your dresser has the bottom slide is the fact you won't encounter information technology, as they are most commonly plant in more than formally designed drawers.

If your dresser drawers are wider, they will probably come up with two slides on the bottom. The double-sliders improve their stability.

You lot need to run into if in that location are whatsoever release mechanisms before removing drawers from the dresser, such as buttons or levers. If in that location are, information technology means that the drawer has to exist released from the mounting plates and that you need to press the button or lever before pulling the drawer out.

On the other manus, when talking nigh how to remove dresser drawers with a bottom slide that doesn't accept any buttons and leavers, y'all but need to jerk each drawer out and lift them until yous hear the ''clicking'' audio.

This, even so, ways that you might also exert some pressure on the drawers occasionally.

ii. How to remove a drawer without lever

Before checking the tips on how to remove drawers without a lever, you should have a screwdriver, and preferably any blazon of working gloves near-by.

Starting time, you need to stand in the front of the dresser and pull the drawer out as far equally you can. Move the drawer outwards while holding the handle.

If at that place are no stoppers, each drawer will get out rapidly. In instance y'all experience some resistance, try to drift the drawers in question a bit.

If wondering how to remove Ikea drawers, this is the whole procedure. You demand a screwdriver, and once you loosen upwards the screws, the drawers volition come out easily enough.

In case your dresser'south drawers take congenital-in stoppers, just make sure to do the post-obit:

1. Later on you pulled out and drifted the drawer, the next stride is to slant it in the flooring direction.
2. Push downwards the sides of the drawer down so the back stop goes up a bit. This way the wheels will go over the stoppers and the drawer will come out freely.

3. How to remove dresser drawer with middle slide

It should exist noted that contrary to the other drawer types, dresser drawers are typically wider. Thus, usually they come with the center sliders.

The purpose of these sliders is to ensure that each drawer is properly fastened to the dresser and that yous can open and shut them smoothly.

In instance you have issues when performing these actions, there is a good chance that the extension slide is the event.

However, at that place are a few things to consider when looking at how to remove dresser drawers with a center slide.

Firstly, yous should check if there is any locking appliance. This is non a common matter, but it is good to be aware of the fact they exist.

In instance yous are dealing with locking mechanisms, you only press the releasing button earlier pulling-out the drawer. When you lot hear the ''click'' sound, you will know that y'all successfully disengaged the drawer.

Another matter you lot should note on how to have dresser drawers out is that there tin exist a pull-out baby-sit. The pull-out guards are plastic pieces to prevent the drawer from falling entirely.

To go over these guards, you simply need to utilise a small amount of force until the drawer is unstuck. Just like with the previous types, if yous face up some resistance – use your strength and jerk the drawer out.

4. How to remove drawers with stops

Let'southward talk a bit more in particular most how to remove drawers from dressers that have safe stops.

Stops are usually fabricated from plastic, they are tab-shaped, and their function is to foreclose the drawer from going out of the dresser all the way.

To be more than picturesque – just imagine if you are in a hurry, and y'all open the drawer with jewelry faster than y'all should.

The side by side scene would look like this: the drawer on the floor, information technology's content all over the room, not something you'd want to deal with on any occasion.

This is just 1 of many examples of why stops are needed. The simplest fashion to remove the drawer is to pull it out, lift the drawer until it becomes clear of the dresser's top, and so release the slides by pressing the slides' levers (or buttons).

Like before, the clicking volition be the sign that you've done everything correctly and that the drawer can be removed.

In that location is a slight difference when the drawer stop is located at the drawer'southward bottom. In this instance, y'all need to locate the tab with your hand while lifting the drawer.

After yous observe the tabs, yous keep them pressed equally y'all remove the dresser drawer out. The same should exist washed for all of the drawers.

5. How to remove a drawer with full extension slides

If you accept longer drawers, at that place is a skilful chance that you will have to know how to work with full-extension slides. The most mutual drawer dimensions for this slide type are 12 inches.

Depending on the dresser, the total-extension slides can be found on either bottom of the drawers' sides.

Pull the drawer out until the end. Bank check out the full-extension slides to locate the buttons to printing and release each slide.

The bottom full-extension slides piece of work on the same principle every bit the i with the stops. Instead of pulling the drawer, y'all need to elevator it.

To locate the releasing button (yous tin can't see it), you have to apply your hand to locate it. Of grade, make certain y'all check out if in that location are stoppers or other prophylactic appliances.

Once you sort all of these steps, slowly push the drawer towards y'all. Continue in listen that if the drawer is stuck, and a bit of forcefulness doesn't help, the total-extension slide might be damaged.

I would besides bespeak out that these tips are equally applicative for those who want to know more well-nigh how to remove desk-bound drawers, or even how to remove drawers from executive desks fabricated of different materials.

6. How to fix dresser drawers that autumn out

Malfunctions are non something we similar. And information technology can exist really frustrating to exist on toes all the time whether the drawer will be stuck again, or volition it fall out if you are not careful enough when opening it.

Most of these problems can exist dealt with by using simple tools we pretty much have at home. Here is how yous tin can fix dresser's drawers fast and on your own.

To access the drawers' tracks, firstly, yous need to remove the drawer from the dresser (consult the chapters to a higher place). The crucial affair to do is to bank check the mounting.

Everything should be in social club if the end of the tracks goes to the dresser'southward dorsum. Make sure that they are secure too.

One of the causes of the drawers falling out is that in that location is a loose spiral somewhere. If that is the instance, you'll need the drill to tighten the screws in question.

The problem tin also be located within one of the rail's sections, so inspect everything thoroughly. In many cases, arrows are pointing the correct management of the installation form.

If something doesn't match, you should fully remove the track, and reinstall it accordingly.

Finishing Tips

Tip Nr.1: Dealing with woodwork

Since a lot of dressers (especially quondam-fashioned ones) are made from wood, there are a few things you should note if y'all want to know how to remove dresser drawers.

When pulling out the drawers, check if the places where the wood joints are damaged. The trouble you lot might face with the older wooden drawers is that with time – forest comes apart.

Some other thing that is common for older wooden dressers is that they often used small nails and glue for additional security. This might cause some resistance when removing the drawers, even impairment if non seen on time.

Nonetheless, the advantage is that fifty-fifty if you have to detach some parts in the procedure, you can put it dorsum together most of the fourth dimension. If you detect this work interesting, you might equally well check how to DIY dresser drawers.

Tip Nr.two: Characterization and double-check

When you have a larger number of drawers, it is a practiced idea to use the labeling numbers while removing them. This way you lot volition have less trouble putting them back in place later on.

You should ever double-check each drawer before returning it to its place, in some cases, you don't have issues removing information technology, but putting information technology back.

Bank check both- the drawers and the dresser to avoid damage

Tip Nr.three: Things to do when the drawer is stuck

Some slides may exist broken, or only stuck for various reasons.

The simplest style to endeavour and solve it is to see if in that location is some debris in the rails. Y'all can use the pocketknife to remove it and unblock the slides.

In case the slide is broken (any type of slide you are dealing with), you tin endeavor using the knife again and run it forth the tracks.

If that doesn't help, the best thing is to consider changing the whole slide, and this should probably be washed by the handy-man.

Tip Nr.4: 1 more than thing about fixing

If you have stripped screws, you might not take to remove the tracks. In many cases, super glue can be used to strengthen them. You can consider it a starting time-aid move.

Information technology can likewise exist seen as a terminal resort earlier purchasing new tracks if the glue doesn't assist to prepare the trouble.

Last thoughts

When learning how to remove dresser drawers, keep in mind that the steps and the challenges are similar, whether you are dealing with the dressers bought in the store or DIY ones.

Different types of slides are used when making all kinds of DIY dresser projects such as DIY Changing Table Dresser, DIY crate dresser, Farmhouse Dresser DIY projects, and and so on.

The process of removing dresser drawers is not complicated, just information technology can be different due to the difference in slides and mechanisms used.

Source: https://www.diypassion.com/how-to-remove-dresser-drawers/

Share this post